# Metal Finisher II — Volvo Group

- Location: Grover, NC
- Posted pay: $21.24–$26.24/hr
- Posted: Nov 19, 2026
- Status: open (checked Nov 21, 2026)
- Apply (employer's site): https://jobs.volvogroup.com/job/Grover-Metal-Finisher-II-NC-28086/1370714155/
- Employer record: https://visajobs.io/company/volvo-group-north-america.md

## Sponsorship history
- Tier: Employer history only
- With this exact title: 0

## Description
Transport is at the core of modern society. Imagine using your expertise to shape sustainable transport and infrastructure solutions for the future. If you seek to make a difference on a global scale, working with next-gen technologies and the sharpest collaborative teams, then we could be a perfect match.
As a Metal Finisher, you will hold a very important role in the Kings Mountain Operations (KMO) facility. In this role, you will inspect fabricated and welded Mack MRU TerraPro cab assemblies for surface, hole, weld, threaded-feature, fit, and workmanship defects. This is a hands-on repair position. The role performs approved welding, stud-weld dent pulling, metal straightening, thread and hardware repair, grinding, blending, and surface finishing; verifies the completed repair; documents findings; and escalates defects that exceed the released repair standard, employee qualification, or Quality and Engineering disposition limits.
Duties/Responsibilities:
• Inspect each assigned cab using direct light, reflected light, sight-line viewing, and hand-feel techniques to identify defects that may remain visible after paint.
• Detect and repair allowable dents, dings, ripples, waves, oil-canning, creases, high and low spots, flange distortion, and handling or fixture marks.
• Verify winking holes, access holes, pierced holes, slots, and mounting features for correct location, shape, opening, alignment, and freedom from obstruction.
• Inspect weld nuts, studs, and threaded features for missing hardware, damaged or contaminated threads, cross-threading, incomplete engagement, loose or spun weld nuts, and incorrect location or orientation; repair threads or remove and replace hardware by an approved method.
• Check visible welds for missed or short welds, cracks, porosity, undercut, burn-through, blowholes, excessive weld buildup, sharp projections, and weld spatter.
• Check panel, bracket, reinforcement, hem, flange, and joint conditions for alignment, gap, flushness, distortion, interference, or missing components.
• Remove approved burrs, sharp edges, weld spatter, minor surface contamination, adhesive residue, and localized scratches or gouges that can be corrected within the established repair standard.
• Perform approved GMAW or MIG and other assigned weld repairs in accordance with the released weld procedure, specified parameters, and visual acceptance criteria.
• Use stud-welding dent-repair equipment to attach pulling studs, pins, or approved pulling media; use a slide hammer, bridge puller, or other approved pulling tool to restore panel contour; then remove the temporary studs and grind or blend the area flush without thinning or damaging the parent metal.
• Straighten and metal-finish damaged areas using body hammers, dollies, spoons, files, grinders, sanders, and other approved tools while protecting adjacent surfaces and features.
• Repair or replace approved weld nuts, studs, small brackets, and other welded attachments; verify location, orientation, weld quality, and thread function after repair.
• Dress and blend completed weld repairs to the required contour while preserving required weld size, sheet thickness, structural integrity, and corrosion-protection requirements.
• Re-inspect repaired areas from multiple angles and confirm that the surface contour, feature function, and workmanship meet the applicable visual standard, drawing, work instruction, or quality alert.
• Identify recurring defect patterns and communicate the cab location, defect type, probable source, and frequency to the Team Leader, Production Supervisor, Quality, and Engineering.
• Record defects and repairs in the designated tracking system or inspection sheet and maintain traceability to the cab when required.
• Support containment, first-piece checks, layered audits, standardized work updates, and continuous-improvement activity within the BIW area.
• Maintain tools, lighting, gauges, consumables, and the work area in a safe, clean, and ready condition.
Repair Limits and Escalation:
• Use only approved repair methods, specified tools, and authorized consumables.
• Perform only the welding processes and repair operations for which the employee has completed required training and demonstrated qualification.
• Follow the applicable weld procedure and specified wire, shielding gas, machine settings, joint preparation, weld size, sequence, and finishing requirements.
• Do not alter a safety-critical, structural, datum, locating, or engineered feature unless the Engineering and Quality teams specifically authorize the work.
• Obtain Quality or Engineering direction before nonstandard component replacement, hole relocation, heat application, structural straightening, or any repair that may change cab geometry or design intent.
• Stop work and notify the Team Leader or Production Supervisor when the defect cannot be corrected within takt or standard repair time, recurs on multiple cabs, creates a safety risk, or may affect fit, function, corrosion protection, or regulatory compliance.
• Segregate or identify nonconforming material as required and obtain Quality or Engineering disposition before release when acceptance criteria are unclear.
Required Qualifications (Education, Skills, & Experience):
• Ability to visually identify subtle metal-surface and assembly defects under production lighting and confirm findings by touch or approved gauge.
• Ability to safely set up and operate assigned GMAW or MIG welding and stud-welding equipment and produce controlled, repeatable repairs on thin-gauge cab sheet metal.
• Ability to use stud-welded dent pullers, slide hammers, bridge pullers, body hammers, dollies, grinders, sanders, and related metal-finishing tools without creating secondary damage or excessive metal thinning.
• Ability to evaluate repaired welds for location, size, fusion, profile, porosity, cracks, burn-through, undercut, spatter, and final surface condition.
• Ability to read and follow standardized 

> History, not a promise: past H-1B filings do not mean an employer will sponsor you or a given role. Data: U.S. DOL OFLC LCA disclosure (FY2024–FY2026 for role counts, certified LCAs) and the USCIS H-1B Employer Data Hub. Not legal advice. Methodology: https://visajobs.io/methodology
