# CNC Programmer Machinist — Regal Rexnord

- Location: Radford, VA
- Posted: Nov 17, 2026
- Status: open (checked Nov 21, 2026)
- Apply (employer's site): https://regalrexnord.wd1.myworkdayjobs.com/Careers/job/Radford-Virginia-United-States/CNC-Programmer-Machinist_R26_06238
- Employer record: https://visajobs.io/company/regal-rexnord.md

## Sponsorship history
- Tier: Employer history only
- With this exact title: 0

## Description
Work Model: This is a fully onsite role, with work performed at your designated Regal Rexnord office.
____________________
SUMMARY
The CNC Programmer Machinist programs various commercial factory machines that turn raw material into useable components. They work from drawings, sketches, work orders, charts and verbal instructions to program, set up and operate various machine tools, work cells and/or CNC work centers to fabricate a wide array of component parts of above average to complex variety. Performs advance setup operations, adjusts and validates programming and operates numerically controlled machine tools to perform a complex series of progressive machining operations. This position requires a broad knowledge of machining techniques and programming.
Essential Duties and Responsibilities
• Works from drawings, samples, work orders and instructions to install and adjust various types of tooling and fixtures in the work centers.
• Calculates and writes programs for CNC work centers to fabricate component parts to stated engineering specifications.
• Works independently to troubleshoot and resolve problems concerning machining operations, tools, materials and CNC programs.
• Performs secondary machining operations on component parts as required.
• Performs detailed analysis of the component parts configuration/dimensions to determine the most efficient machining operations required for production.
• Loads computer programs into CNC work centers, appropriately adjusts machine speeds/feeds, modifies programs and documents changes as required.
• Processes first piece through initial run, analyzing and making critical adjustments to tooling, programs and process parameters of the work center.
• Operates and monitors work centers to perform progressive turning, boring, drilling, tapping and reaming operations.
• Fabricates simple holding fixtures as required for machining.
• Inspects parts for stated dimensions and surface imperfections to prepare for production.
• Works with engineering and supervisory personnel to troubleshoot and resolve design, equipment, and operating difficulties.
• Performs preventative maintenance duties as scheduled by Maintenance
• Assists training lower level machinists, answering work questions, resolving operating difficulties and reviewing completed work assignments.
Critical Competencies
• Broad knowledge of machining techniques to perform advanced setup operations.
• Works independently to troubleshoot and resolve problems concerning machining operations, tools and CNC programs.
• Proficient in the use of cutting tools and measuring equipment
• Capable of reading and understanding drawings
• Demonstrated experience of training lower level machinists.
Has received formal training in the areas of:
CNC Programming
• Capable of programming complex controls on various types of CNC equipment. Requires thorough understanding of different types of controls such as: Mazatrol, Fanuc, etc.
• Requires competent programming skill with modeling software such as: Esprit, MaterCam, Cad Cam, Smart Cam.
• Capable of programming and operating Multiple Axis / Spindle Machines
• Awareness of new CNC tooling and technology features
Machining
• Competent in the design of tool holding requirements for parts.
• Requires expertise in the operation of a minimum of three pieces of manual equipment such as: Mills, Lathes, Grinders, Proto Track Mills/Lathes.
• Requires expertise in the operation of a minimum of two pieces of CNC equipment such as: CNC Mills, CNC Lathes, CNC Grinders, Wire EDM Machine
• Thorough understanding of Geometric Dimensioning and Tolerancing (GD&T). CMM operations knowledge is preferred.
• Cutting tool fabrication experience.
• Demonstrated experience in leading Process Improvement and Cost Reduction Initiatives.
Education and Experience Requirements
• AAS Degree in Machine Technology preferred.
• Minimum of seven years of CNC programming experience and/or ten years of manual machining experience required.
Physical Demand and Work Environment:
The physical demands and work environmental characteristics described here are representative of those
an employee must meet, with or without reasonable accommodation, to successfully perform the
essential functions of this job:
Physical Demands:
· While performing the duties of this job, the employee is regularly required to
use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee
frequently needs to stand, walk, and sit. Occasionally, the employee must climb or balance;
stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds.
Specific vision abilities required include close vision, distance vision, color vision, peripheral
vision, and the ability to adjust focus.
Work Environment:
· The work environment characteristics described here are representative of
those an employee encounters while performing the essential functions of this job
Work Type: Onsite -This role follows an Onsite Work Schedule and requires working from your designated Regal Rexnord office on a full-time basis.
Expected Base Salary Range: [51,480 – 64,355]
The salary range provided is intended to display the value of the company's base pay compensation for this position. Salary is dependent on a multitude of factors, including but not limited to the physical worksite location, the geographic market of that location, candidate's skill set, level of experience, education and internal peer compensation comparisons among other potential factors.
This role may be filled at different levels depending on the candidate’s experience, skills, and business needs.
Restrictions imposed by federal export control laws may limit this job opportunity to candidates who are a ‘U.S. Person’, which includes U.S. citizens, U.S. nationals, U.S. permanent residents, individuals granted asylum in the United States, and refugees in the United States, or who otherwise can qualify for a license that p

> History, not a promise: past H-1B filings do not mean an employer will sponsor you or a given role. Data: U.S. DOL OFLC LCA disclosure (FY2024–FY2026 for role counts, certified LCAs) and the USCIS H-1B Employer Data Hub. Not legal advice. Methodology: https://visajobs.io/methodology
